Features

◆ Through research，development and design，AP series pneumatic actuators incorporate the latest mechanical technology，materials，and innovative ideas。The product proudly boasts the following features

◆ Full conform to the latest pecifications: ISO5211,DIN3337, NAMUR and VDI/VDE3845.

◆ The extruding high intensive aluminum body possess a honed internal surface coated with hard anode oxygenation for long life, low coefficient of friction and swift performance

◆ Excellent, compact and modernized construction along with multe-specifications make the selection both economic and beneficial

◆ All acting surfaces adopt high quality bearing, resulting in low friction, high cycle life and no noise

◆ The two independent external travel stop adjustment bolts can easily and precisely adjust±5°at both open and close directions

◆ Same outline actuators have the functional modes of double action and spring return, and the spring return has the often-open and often-close styles

◆ Multi-function position indicator with NAMUR is convenient for mounting accessories

◆ Pre-compressed load spring is convenient for safe mounting and teardown procedures

◆ Die-casting aluminum pistons and end caps have high intensity and light weight

◆ Different O-rings materials are available for high and low temperature

◆ According to different demands we offer Multi-travel rotations(e.g. 120°、135°、180°)and three position actuators

◆ Solenoid valves are easily mounted without any connecting plate

Technical Parameter

◆ Operating media: Dry or lubricated air, or inert gases, which should be compatible with the inside parts and lubricant of the cylinder. The temperature of the operating media is a minimum of －20℃.The dimension of the impure paraticle is at the largest of 30μ. If the positioner is needed,the dimension may be at the largest of 5μ.

◆ Air pressure: 3bar ～8bar

◆ Operating temperature:

                Standard: －20℃～＋80℃

                Low temperature: －40℃～＋80℃

                High temperature: －20℃～＋160℃

◆ Lubrication: Under normal operating conditions, the standard needs not accrue lubricant.

The function and usage of the actuator and the accessories

◆ Double action actuator: open and close the valve

◆ Single action actuator(Spring return):When air or power is lost, the actuator either closes the valve automatically (often-closed style) or opens the valve automatically (often-open style)

◆ Double-control solenoid valve: power to one solenoid opens the valve, power to the other solenoid closes the valve. This kind of solenoid possesses the memorial function(available for explosion proof)

◆ Single-control solenoid valve:power to the solenoid opens or closes the valve. Loss of power will close or open the valve(available for explosion proof)

◆ Limit switch box(signal feedback):remotely passes the signal of the valve’s opened and closed status(available for explosion proof)

◆ Pneumatic positioner: according to the air pressure(0.2～1bar)to control the medium flux(available for explosion proof)

◆ Electric positioner: according to the electric current(4～20mA)to control the medium flux(available for explosion proof)

◆ Electric-pneumatic transfer: transfers the current signal to air pressure signal for compatibility with positioner

◆ Tri-unit Air disposal: this includes regulator, filter and oil unit. They can clean and lubricate the connection parts

◆ Manual equipment: Able to use manual operation in the event of loss of air or power